martes, 24 de agosto de 2010

Rifle de Boba Fett ROTJ : 1-Iniciando la construcción.

Boba Fett´s Rifle ROTJ: Starting the construction.




Como pueden ver en las fotos la base para construir el rifle es básicamente una mezcla de madera con Trupán…

As you can see in the pictures the base to construct the rifle is basically a wood and Trupán mixture …


Como ven para rigidizar mas el conjunto hice una ranura en el medio de parte del cuerpo del arma para introducirle una pequeña barra de acero, definitivamente ese sector donde está ubicada la barra era el punto más vulnerable al ser muy esbelto, así que se me ocurrió esta solución para tener la misma esbeltez pero con una mayor dureza.

As you see to make more rigid the set I made a groove in the middle of the body of the weapon to introduce a small steel bar to it, definitively that sector where the bar is located was the most vulnerable point to be very slim, so this solution was happened to me to have the same slenderness but with a greater hardness.






Hasta la próxima………………. See you soon

miércoles, 18 de agosto de 2010

Crucero Mon Calamari - Home One en Lego.

Home One´s - Mon Calamari Cruiser in Lego.

Aut(h)or: Thomas Benedikt


Fuente: http://www.geekologie.com/2009/03/epic_30500_piece_lego_star_war.php

jueves, 12 de agosto de 2010

Rifle de Boba Fett EE-3– ROTJ

Boba Fett´s Rifle EE-3 -ROTJ




Para los que asistieron a la inauguración de la exposición por los 30 años de ESB organizado por Star Wars Rebellion Perú en Lima no será ninguna novedad ver este rifle ya que era el que uso boba Fett en el evento. A partir de hoy por aquí les mostraré lo que fue el proceso de construcción del rifle, espero que les guste.

For that people that went to the inauguration of the exhibition for the 30 years of ESB organized by Star Wars Rebellion Peru in Lima it will not be any newness to see this rifle since he was the one that use Boba Fett in the event. As of today and this way I will show you what was the construction process of the rifle, I hope you like it.

Este es un trabajo hecho por encargo para la tienda de juguetes de colección de Lima Panchurritoys. Cuando me propusieron construir el rifle del legendario Boba Fett para completar un traje me pareció una oportunidad genial de reproducir por primera vez un arma de la saga de Star wars en escala 1:1, hasta el momento solo había hecho modelos a escala pero nunca una réplica a escala real, así que el encargo fue doblemente tentador y me puse a trabajar en ello.

This it is a work done by order for the toys of collection´s store Panchurritoys in Lima. When they proposed me to construct the rifle of the legendary Boba Fett to complete a suit seemed to me a brilliant opportunity to reproduce for the first time a weapon of the saga of Star wars in 1:1 scale, until the moment i had only made scale models but never a prop replica in real scale, so the order was doubly tempting and I put myself to work in it.

El encargo se trataba de reproducir el arma de Boba Fett vista en el Regreso del Jedi que, como explicare luego, es bastante diferente a la que vemos en ESB, es un detalle en el que hasta ese momento no había reparado, no solo los trajes tienen diferencias sino también los rifles de Boba Fett.

The order was to reproduce the weapon of Boba Fett seen in Return of the Jedi that, as i explain then, is quite different from that we see in ESB, it´s a detail in which until that moment it had not repaired, not only the suits have differences but also the Boba Fett´s rifles.

Durante el proceso de producción de ESB se buscaba dotar de un arma al nuevo personaje de soporte de la película el cazarecompenzas Boba Fett y entre otras armas se planteo el que use un rifle de cañón corto que fue diseñado a partir de un arma real. Se tomó como base una pistola de fogueo que servía para lanzar señales luminosas marca Webley and Scott No. 1 (Mark "1") fabricada en 1917 y que fue usada durante la 1ra guerra mundial. A esa arma se le aumento un cañón mas largo convirtiéndola en un pequeño rifle y que es el que vimos en las escenas de la ciudad de las nubes de Bespin.

During the production process of ESB they looked for to equip with a weapon to the new support´s character of the film the bountyhunter Boba Fett and among others arms they consider that he uses a short tube´s rifle that was designed from a real weapon. It was taken as it bases a blank pistol that served to send luminous signals brand Webley and Scott no. 1 (Mark " 1") made in 1917 and that was used during 1th world war. To that weapon they increase a long tube but becoming it on an small rifle and that is the one that we saw in the scenes of Cloud City in Bespin.

Webley and Scott No. 1 (Mark "1")





Para la producción de ROTJ este rifle se modifico aun mas, lo pintaron totalmente de negro con lo que eliminaron esa imagen medio western del rifle usado en ESB y la dotaron a mi parecer de una imagen más impresionante para el cazarecompenzas.

For the ROTJ´s production this rifle was modified even more they totally painted in black and so they eliminated that kind of western image of rifle used in ESB and they equipped it of a more impressive image for the bountyhunter to me.





Antes de saber que construiría este rifle pensaba que el rifle visto en ESB era el mejor de todos, pero ahora luego de ver muchas veces las fotos de referencia y construirlo pieza por pieza ahora puedo decir que el mejor rifle es el que uso Boba Fett en ROTJ, la nueva imagen es simplemente genial.

Before I know that I would construct this rifle i thought that the rifle seen in ESB was the best one of all, but now after to see often the reference pictures and to construct it piece by piece now I can say that best rifle is the one than Boba Fett uses in ROTJ, the new image is simply brilliant.

Aquí una foto con los rifles de Boba hechos por un fan donde pueden ver las diferencias.

Here a picture with Boba´s rifles made by a fan where you can see the differences.


Luego de esto empecé dibujando los planos para la construcción del rifle a partir de esquemas e imágenes de referencia…

After this I began drawing the blue prints for the construction of rifle from schemes and reference images…




Con este post comienzo el “making off” del rifle de Boba Fett….Hasta la próxima.

With this post I begin the Boba Fett rifle´s “making off”… see you soon.

 
 
 
 
 

domingo, 8 de agosto de 2010

26- Maqueta Spha-T walker: Final…

Spha-T walker scale model: Final…


Como dice el titulo al fin termine el proceso de construcción y aquí les muestro lo que serán las últimas fotos de la construcción…. Terminando el cañón principal con superficies de trupán y tubos de PVC modificados con calor…

As it says the title to I finally finished the construction process and here I show you to what they will be the last pictures of the construction…. Finishing the Main gun with surfaces of trupán and modified with heat PVC´s tubes …
 
 









 
Y aquí ven el Spha-T walker con su primera imprimación…
 
And here you see the Spha-T walker with his first primer…
 
 

 
Imprimación: aplicación de color base sobre la que se pondrá el color final, a fin de unificar el conjunto (sobre todo en maquetas tipo scratch con materiales de diversa naturaleza y forma) creando un fondo neutro sobre la que se aplicaran los colores finales; también sirve para encontrar errores de escultura que serán corregidos en esta etapa. Los modelistas de ILM imprimaban los modelos con color negro, por ejemplo aquí pueden ver el modelo a escala de la fragata médica rebelde vista en ESB.
 
Primer: application of base color on which the final color will be put, in order to unify the set (mainly in scale models type scratch with materials of diverse nature and forms) creating a neutral bottom on which the final colors were applied; also it serves to find sculpture errors that will be corrected in this stage. The ILM´s modelmakers printed the models with black color, for example you can see here the scale model of the rebel medical frigate seen in ESB.
 
 
 
Y bueno solo queda mostrar la maqueta finalmente terminada, pero eso será en el siguiente y post…
 
And so just is to show you the scale model finally finished, but that will be in the next post…
 



miércoles, 4 de agosto de 2010

Maqueta AT-TE walker – en solo 1 imagen

AT-TE walker scale model - in just 1 picture
¡¡Ya no tengo tiempo!!.. (por eso la ausencia de publicaciones, disculpen si siguen mi blog) hoy publicare una imagen del AT-TE que hice hace mucho tiempo y que no quería que quede petrificada por siempre en mi disco duro… espero les guste.


I do not have time!!… (that´s the reason for the publication absence, excuses if you follow my blog) today I will publish an image of the AT-TE that I made a long time ago …. and that did not want that they are petrified by always on my hard disk… I hope you likes.



miércoles, 28 de julio de 2010

25- Maqueta Spha-T walker: Construyendo el cañón principal…

Spha-T walker scale model: Building the main canon…

Luego de una larga ausencia les muestro lo que estuve construyendo en todo este tiempo…


After of a large absence I show you that I was constructing in all this time…







Como ven la base del cañón es un tubo de PVC de los que se usan en gasfitería (plomería), rodeado de paneles de Trupán para darle la forma final….

As you see the base of the cannon is a tube of PVC of which they are used in plumbing, surrounded of panels of Trupán to give it the final form ….





Luego debía diseñar la articulación del cañón, como se puede ver en las escenas de la batalla de Geonosis, el cañón puede elevarse hasta cierto punto para realizar disparos hacia arriba como se puede apreciar en la escena en donde un grupo de Spha-T´s destruyen una nave de control separatista mientras intentaba escapar al espacio…

Next i had to design the joint of the cannon, as it is possible to be seen in the scenes of the battle of Geonosis, the cannon can rise until certain point to realise firings upwards as it is possible to be appreciated in the scene where a group of Spha-T´s destroys a separatist control ship´s while he tried to escape to the space…





Para lograr esto diseñé una articulación con un punto de articulación a modo de pivot que permita ese movimiento…

In order to obtain this I designed a joint with one point of joint as a pivot that allows that movement…






Luego aumente paneles y construí un extraño detalle en la parte delantera del cañón principal…

Next i increases panels and I constructed a strange detail in the front part of the main cannon…





Aun queda un poco mas por hacer, ¿llegare a terminarla para el concurso de maquetas?………espero que sí..

It is even a little but to do, can I finish it for the scale model´s contest? ......... I hope so.





Hasta la próxima………………… see you son